Tag Archive | EA3500

Yes, It Is True: Cisco Linksys RE1000 Wireless-N Range Extender Works BUT Drops Wi-Fi Connection On A Regular Basis.

Anura Guruge, June 8, 2013.

..
.
by
Anura Guruge


Re1000pluggedinRelated posts:
>>
Cisco Linksys RE 1000 — Aug. 10, 2013.
>>
Ventilated shelf for Linksys EA3500
>>Sep. 18, 2012.

>> It really was the D-Link router …
>> Sep. 9, 2012.

++++ Search ‘Linksys’ for other posts >>>>


I took a sledgehammer to the RE1000!

RE2000 is as bad as RE1000!


DlinkextenderThe Cisco Linksys RE1000 Wireless-N Range Extender I bought, refurbished from Amazon in mid-August for $39, sure does work and works well when it is working.

But, I had noticed, by detecting a drop in signal level at the basement that it drops the Wi-Fi connection — maybe once a week.

To re-establish the connection you just have to recycle power; i.e., unplug RE1000 from wall socket, count to ‘Mississippi 10’ and then plug it back in. The ‘blue-light‘ on the unit will flash for a few seconds and then stay on — solid. You, again, have Wi-Fi connection. Easy enough, though annoying.

Happened again yesterday. I recycled it and was ‘OK’. But, this time I decided to check the Web.

Hello, hello, hello. I am, not by a long chalk, the only one who has noticed this problem. LOTS of reports on the Web of the same problem.

I then looked at the ‘new’ RE1000 replacement, the RE2000. That appears to be no better. I was basically warned off from getting it.

I looked around. I will NOT replace the RE1000. I already have it. I decided to AUGMENT.

So, I am getting a 2nd Wi-Fi range-extender. Then I can have one on the 1st floor and another in the basement. The damn things, in the scheme of things, are cheap enough.

This time I went with D-Link. I like D-Link. I trust D-Link. I started using D-Link for my Wi-Fi in 2001. I had D-Link technology until September 2012 when my latest and last D-Link Wi-Fi router blew-up. I went with Cisco Linksys because the TDS technician recommended it — as the TDS favorite.

Funnily enough I don’t use a Wi-Fi router, myself, since then! I have my own dedicated fiber! So no router. The Wi-Fi router is for the rest of the family.

I got a D-Link DAP-1320 N 300Mbps Wi-Fi Range Extender. Gets better reviews than the RE1000. I got one for $27.04 with FREE shipping. Christmas is coming and I am getting a jump start on ordering all of the Lego sets we need for the kids! So no problem these days getting a more than $35 order put together. One Lego set covers that.

Lets wait and see. For $27.04 I will happily avoid the aggravation. So ideally the D-Link will boost the signal and let the RE1000 get a piggy-back.

Cisco Linksys RE1000 Wireless-N Range Extender: Truly A ‘Piece of Cake’, Plug-and-Play Device; 4 Minute Setup.

Anura Guruge, June 8, 2013.

..
.
by
Anura Guruge


Re1000pluggedinRelated posts:
>>
Ventilated shelf for Linksys EA3500
>>Sep. 18, 2012.

>> It really was the D-Link router …
>> Sep. 9, 2012.

++++ Search ‘Linksys’ for other posts >>>>


<< I took a sledgehammer, April 18, 2014,
to this piece of junk! >>


We have had a high-end Cisco Linksys EA3500 Wi-Fi router since September last year. It is a dual-band wireless-N router and it does give us Wi-Fi right through the house.

While everything is relative (and I think of it as a small house) this is a 4-story, full-size New England colonial with all four floors in use. The top floor, the 4th floor, is a large open room that we use as our office. The Linksys EA3500 is mounted on the side wall in this 4th floor room. Since we have two 15Mbps fiber links coming into the house, one comes in on one wall the other on the other side.

Cisco Linksys RE1000.

Cisco Linksys RE1000.

Our ASUS and Toshiba laptops as well as the two Google Nexus 7 pads don’t have a problem picking up a decent Wi-Fi signal anywhere in the house. Even the DirecTV Wi-Fi box works fine — though it is as far from the EA3500 as you can get. Our family room, with the ‘big’ computer is on the bottom floor — three (3) flights of stairs down.

But, I decided we need a stronger Wi-Fi signal on the lower 2 floors.

So, I looked around. I kind of knew that there were range extenders.

I am savvy enough to know that it makes sense to stick with the same vendor, if possible, though, of course, Wi-Fi, based on rigorous standards, is vendor agnostics. But, given that we now have a Linksys (after a decade of swearing by D-Link) I looked at the Linksys offerings. As is my wont when looking for ‘accessories’ such as this, I started with Amazon.

I quickly spotted the Linksys RE1000 Wireless-N Range Extender. I also saw that there were Cisco-refurbished units for $39 — with a 90-day warranty (though I don’t worry about such things with Amazon since they are so good about returns).

Wi-Fi extender has no moving parts. I knew that ‘refurbished’ meant that customers had just returned it — possibly because they couldn’t get it to work.

I have had great luck with refurbished electronics and this was the simplest of these devices. So I ordered a refurbished for $39 and got the FREE shipping.

I placed the order last Friday night and it arrived in the mail on Thursday.

I went to install it this evening. It was a piece of cake. About 4 minutes start to finish. All I had to supply, as I expected, was the Wi-Fi password for our network. Bingo. Done. Bob, was my uncle.

That really was plug-and-play. OK, there was one hitch. You have to use a supplied CD to get it up and running. The setup application on the CD does not run on Windows 8. That was annoying. So I had to swap laptops. That was the only hitch.

It has noticeably increased Wi-Fi bandwidth in the lower flows. The laptops are getting 65Mbps — and I think that that they are gated by their chip sets.

So for $40 this was a worthwhile investment. I am particularly delighted by how easy it was to set up.

RE1000-Network_Diagram

Extend this two-fold to get a rough idea of our setup. But the same basic idea — our router right at the top and three floors below it.

Now in the interest of full disclosure I have to admit that Cisco was a long-term client of mine and that over nearly a decade I had a kind of on-again, off-again near incestous relationship with Cisco — my loyalties sometimes torn by my ‘lifelong’ association with IBM. Yes, I actually do have a Cisco employee badge — because I was theoretically employed by them for a few months. Yes, Cisco bought a token-ring startup I was involved with — after I made a phone call. Yes, I got stock options. But this was in the 90s. Yes, I used to own a fair number of Cisco shares. No longer. So in reality I don’t really have a conflict of interest — other than a chequered, and interesting, history. 

A Ventilated Shelf For The Linksys EA3500 And My History With Water-Cooled Computers.

Anura Guruge, laughing, picture November 16, 2011.

Cisco Linksys EA3500

….
……
by Anura Guruge


Prior related posts:
1/ Internet Bandwidth Issues With My TDS Broadband Access
Aug. 28, 2012.

2/ Unless It Is A Dire Emergency Get Your Networking Cables Online; Update On My Internet Bandwidth Woes – Getting 2nd TDS Line!
Aug. 30, 2012.
3/
TDS Highspeed (Fiber) Internet Access In Alton — It REALLY Was The D-Link Router!Sept. 9, 2012.

That my D-Link router was really screwing up my Internet access affected me deeply! It really bothered me and still does. That the problem could have been heat related upset me even more. Since our ‘office’ is in the attic of what is a 4-story colonial the heat rises. Yes, I use A/C much of the Summer as attested to by my electric bills. I pay more to cool this house than to heat it. When I had my main PC built in October 2009 cooling, in terms of fans and a good case, was the #1 priority. No, I will not contemplate liquid cooling for a PC, that is just overkill. [Around 1975, when working for IBM at Hursley, I had the privilege of working on the groundbreaking IBM S/370 Model 168. It was beyond state-of-the-art at that time. It was furthermore water-cooled! I loved that machine. At Hursley, then the largest IBM Lab. outside of the U.S., we ended up with a few of those. When we built the then very modern ‘D-Block’ they coupled the water-cooling heat exchanger of our 168s to the heating system of the building. A building heated by the heat generated by computers. This was around 1978. How cool.

I have to share this picture with you because it shows stuff that so many ‘young’ folks have never even heard of. See those TWO (2) big, black screens, with the big knobs underneath on the left. Those are MICROFICHE readers! Microfiche. Aaaah; talk about nostalgia. Microfiche was the iPad of the 1970s. In those days we learned how to use microfiche readers. So why TWO microfiche readers on a big computer. Basically to fix it when it went wrong. All of the listings of the Operating System, Utilities etc. were on microfiche. You read the code on the microfiche reader while debugging these computers. At Hursley where we were all Techies we would do this all the time. Usually as a team. Somebody calling out PSW readings, another at the microfiche reader trying to find the right chunk of code and others milling around …

The water-cooled IBM S/370 Model 168 which to me was the coolest of computers … I used to spend hours on these 168s.



Anyway back to cooling and routers.

The Linksys EA3500 is a work of art; a contemporary sculptor. No unsightly antennas and all the lights are at the back. 90% of the ventilation ducts are underneath and it is tilted so that there is room for air to circulate. Timothy Barker, the amazing TDS Tech, who fixed our Internet problems and installed the 2nd fiber line to the house said that many people use Linksys routers upside down so the ventilation holes are at the top.

The D-Link router had sat on my desk, behind my 2 monitors for 5 years. But, because of the way the phone jacks are located in this house, the 2nd fiber line was going to be on the other side of the room. So the Linksys could not be on my desk. Since Deanna has a surfeit of little tables and shelves on that side of the room I had assumed we could put it one of those. No way. Deanna wanted it out of the way. She wanted me to build a small shelf and mount it on the wall away from all her other stuff. If there is one thing I can do, that is to build shelves. 40 years of practice given that wherever I live, I am surrounded by books. The Linksys weighs less then 3 pounds. So there was no need for a ‘fancy’ shelf.

But, what I decided was to make it ventilated so as to mitigate future heat-related problems. So I drilled a lot of holes. I also mounted a piece of wood at the back so as to accentuate the routers tilt — again to increase the amount of circulation underneath the router. Also, of course, mounted it about 1″ ahead of the bracket (and I had to drill new holes in the metal brackets for that) so that we could run the cables to the router without problems. Oh, the little brass screws are my quick-and-dirty solution for making sure that the router won’t slide off the shelf. I, of late, use the screw approach often. Works and is easy. When I am really motivated I use embedded dowels, but that would have been too much for this little shelf.

One thing I overlooked. All the lights on the EA3500 are at the back! Most times, IF I want to see them, I can see them reflected off the wall — given that they are bright green. But, I will have to bring a small mirror up here. Anyway, IF you are going to build a shelf for a router think about ventilating it. Yes, for a fee I will build you one.

TDS Highspeed (Fiber) Internet Access In Alton — It REALLY Was The D-Link Router!

Anura Guruge, laughing, picture November 16, 2011.

….
……
by Anura Guruge


Prior related posts:
1/ Internet Bandwidth Issues With My TDS Broadband Access
Aug. 28, 2012.

2/ Unless It Is A Dire Emergency Get Your Networking Cables Online; Update On My Internet Bandwidth Woes – Getting 2nd TDS Line!
Aug. 30, 2012.

Cisco Linksys EA3500

I am humbled, amazed and at the same time rather pleased. It really was the router! The D-Link DIR-655 that promised so much. Wow. I am still in a daze about that.

I have had broadband, high speed Internet access for about 12 years and wireless networking in the house for about 11 years. Though it got me nothing, though I can take credit for convincing the prestigious ‘The Margate‘ to offer Wi-Fi in 2003, I was an Wi-Fi evangelist (as ever) ahead of my time. At home I tried to have the latest in Wi-Fi standards. So, I got the now de facto 802.11 n when it was still a draft standard and not supported on all devices. Hence my preference for D-Link. They liked bleeding-edge Wi-Fi technology too. Till last Thursday, September 6, 2012, I have only ever used (recommended and sold) D-Link routers. Whenever folks blamed Internet problems on my D-Link I was skeptical and until now they were always wrong.

When Union Tel. first installed my 10Mbps Fiber to the house we had, from day one, short, very annoying, Internet drops. We would lose the Internet for about 40 seconds then get it back. It would happen about 3 times a day. As you can imagine, for the first 48 hours Union Tel. consistently blamed it on the (then quite new) D-Link DIR-655. But, I stood by my D-Link pointing out that I had used it for 2 years with Metrocast and never had a problem. Union Tel. had installed the Fiber on a Friday. That was a mistake. They were in a hurry, both technicians having the afternoon off. Those two, quite old, were very nice BUT if I ever see them within 100 yards of my TDS equipment I will call the police. Yes, they admitted that 10Mbps Fiber was new to them.

It took until Tuesday for Union Tel. to belly up that THEY had an issue and it was not the poor, maligned D-Link DIR-655. They came and gave us a Static IP address (rather than us having to use DHCP). Problem solved immediately and forever. The problem is that TDS does not offer Static IP to residential customers. So I have ‘issues’ each time I talk to TDS. They get very confused.

This time around, the amazingly competent (ex-Marine) Tim Barker, proved to me that it was the D-Link. I had to agree. Bandwidth fluctuated through the router. So, given that Tim and TDS like Linksys I bought a good Linksys.

Wow. Wow. Wow. What a difference. I can’t believe that we suffered for this long because the D-Link was dying. That was a lesson for me.

No I did not try upgrading the D-Link software. The software was upgraded about 18 months ago. Though I can’t attest to it this felt to me (and to Tim) as hardware degradation — and I realized that the D-Link was running hot, in what is a hot room (though we do run A/C in this room most of the Summer). Not sure, but that the problems started soon after Teischan got a Wi-Fi Google Nexus 7 pad seems suspicious.

My biggest takeaway from this sad experience is the need to keep the router COOL. I am going to build a special, ventilated shelf for it today — BECAUSE tomorrow we, actually TDS, is moving everything around.

Yes, we are still getting a 2nd Fiber line so that we will have a total of 25Mps (about 18Mbps guaranteed) to the house. I am done with routers for my main, work computer. This computer is getting plugged in directly to the wall (though yes, there is still a TDS Fiber router on the garage wall). At least I will not have to contend for bandwidth with the kids and Deanna — and the kids suck up bandwidth with their videos and games. I will keep you updated after the cut-over tomorrow.



Suffice to say that over the last 15 days I have had a huge amount of interactions with TDS, by phone and in person. TDS tries so hard to please. They dropped the ball once but recovered quite well. The local support during that time, all done by Tim Barker, has been beyond exemplary. I used to be the Customer Support manager for ITT UK. So, I remember a few things about customer support. Tim reminds me of the best of the best that used to work for me.

Anyway, I have learned two things about TDS and their Internet Fiber service from a couple of Little Birds that shared the scoop with me. Yes, TDS has had service issues with their Fiber BUT they think they are beyond that now. But, something to me vigilant about.

The second, and more serious, is that TDS, in Central NH, is basically out of Fiber capacity! No, it is not a Finer Optic cable shortage. They have plenty. It is a Central Office equipment shortage. They have run out of ports to plug-in new Fiber customers. They jumped through hoops last week to get us our 2nd Fiber and we only got it because TDS likes us. They have plenty of Copper, but the bandwidth you can get on Copper decreases with distance from the C.O. So they relented and we are getting Fiber and the fact that I spent 40 minutes on the phone with TDS and dashed off 4 e-mails definitely was a factor. But a heads up to others. You might not be able to get Fiber from TDS for a year or more! It is a supplier issue going back to Union Tel. TDS basically has to swap out the old equipment at the C.O. and install new. That costs a lot of money and requires huge amounts of coordination — and we in central NH are but country bumpkins who wouldn’t notice drop in bandwidth (and are loath to pay for bandwidth).

Just read in ‘Popular Mechanics’ today — compared to many countries in the world we in the U.S. have relatively slow Internet access. That kills me. It should really bother YOU too.

Unless It Is A Dire Emergency Get Your Networking Cables Online; Update On My Internet Bandwidth Woes – Getting 2nd TDS Line!

Anura Guruge, laughing, picture November 16, 2011.

….
……
by Anura Guruge


Linksys EA3500 Dual Band N Router

TDS, on 4:58 pm (Eastern) on Tuesday, redeemed themselves, albeit after my 3rd call to them that day wanting to know why I was still waiting for a technician when I was promised one, the night before, by noon. Tim Barker, their local Internet guru, who I had met a year ago when he came to change my static IP-address, made an after hours call (at zero cost to me) at 6:30 pm. Tim is good. Time trouble shot the whole problem all the way from the external, on the garage wall, Fiber router all the way to my PC. Looks like it is my 5-year old, D-Link DIR-655 router. Usually I am beyond skeptical when people tell me that it is a router problem. This time it looked pretty conclusive though I am still not 100% convinced, especially after a little bird told me that TDS had had some major issues with their Fiber Internet service (but that I should have experienced those prior to last week).

Tim likes Linksys, though I have used D-Link wireless routers since 2002. I acquiesced to him, but made sure I got one of their higher end products (especially as I had a $20 off coupon) because I do know folks have had issues with the lower end Linksys products. Time was waxing lyrical about Cisco until I showed him my old Cisco employee badge from 1996! I know Cisco. Cisco’s irrepressible Executive VP of Marketing, in the mid-1990s, the man that put Cisco on the map (so to speak), Don Listwin wrote the Foreword for my third book. [I met Don, in a bar in D.C. during one of those gala, mid-1990s networking shows. I dropped a full glass of beer on his lap even before I shook his hand. He liked me ever since and jumped at the chance of writing the Forword when everybody said “Don’s too busy and important to waste time writing a blurb for you“!)

I have a habit of being able to think while I am asleep. I had trained myself to do that over 30 years. When I woke up the next day, my brain told me: ‘hey, look at getting a 2nd line so that YOU don’t have to EVER contend with router problems again’. Wow. I am a confirmed bandwidth junkie — really my only addiction. You know that old adage: ‘you can never be too rich or too thin‘. Well never having been even marginally rich I can’t attest to the first part, but I do know that you can be too thin — because I was, in 1983, when I, through dieting and exercise, reduced my weight from 210 to 135 pounds. I was skin and bones and looked like a skeleton with a translucent skin. But, I definitely stand by this adage: ‘I can never have enough bandwidth‘. This is not the first time I have opted to get two lines to the house. Many of you are probably too young to even have heard of ISDN, the broadband solution of the 1990s. It was incredibly, for the time, fast at 64Kbps. Yes, that was a ‘K’, for Kilo (meaning thousand), as opposed to today’s ‘M’, for Mega (meaning million). To get that in rural NH, Meredith to be precise, was brilliant. I knew I wanted more. I was, of course, in the networking field. Looked around and found what was called an ‘aggregating router’ — you could plug in 2 ISDN lines to it and get 128Kbps to the house. That is what I did.

I had thought about getting another aggregating router. But, opted for a different route. My main PC is getting plugged in directly into the wall, sans a router. So now I should get ALL of the download and upload bandwidth that TDS says I am getting. Yes, I will monitor it.

Putting the Linksys router on the other TDS broadband line. That will be mainly for Wi-Fi. I don’t use Wi-Fi. So that line and its bandwidth will be Deanna and the kids — and very occasionally for one of my backup machines and for Teischan’s Linux machine (which she now rarely uses after getting a Google Nexus 7 pad).

I will keep you posted on my TDS Internet bandwidth saga. Installation of the 2nd line and the switch-over is next week.  Since I use a static-IP address they will have to configure that on my PC. I have a feeling we will end up getting a static IP on the second line too.


All these changes got me thinking about cables. Ethernet LAN cables can get damaged. I have run into that. Though I don’t totally buy into the need of gold, jumbo cables for each and every application, after 30 years in networking I do know that there is a breakeven point in terms of a cable’s quality and its capacity (errors being the biggest culprit, slowing you down rather than crippling you). So I looked around for some new cables. I am not a cable junkie. Cables don’t excite me — other than the OLD, giant, 64 pin, bus-and-tag cables. That was my specialty; bus-and-tag cables. One of my longest standing clients was BusTech — where the ‘Bus’ referred to those bus-and-tag cables (from the 1960s)!

Wow, we now have Category 6 (Cat 6) cables for 100Gbps applications. Cat 5 is the standard for 10/100/1000 Mbps Ethernet. They have a Cat 5e for 1G. Cat 6, which is backward compatible with 5, is not expensive ONLINE. Plus they come in cool, bright colors like orange, red, green, violet etc. 7′ cable is $4.25 plus shipping.

Since I knew I was going to going past a BestBuy over the next few days, I thought that I would just swing by and get some cables. Just for the heck of it, I checked the BB prices. Wow. I knew BB tries to make some margins on cables. I did a few months at BB a few years ago as an Epson merchandiser. Great job. One of the best I had. Got to know BB, their procedures and quite a few of the staff (in Concord) quite well. I do not blame BB. They are working on thin margins. So they have to compensate somewhere and for that cables are perfect. If you just bought a printer you are going to want a cable, if you don’t already have one.

But, in this instance, with these Cat 6 cables I was amazed. I bought 3 cables, with shipping, for what I would have paid for 1 at BB! I went to Cables.com. I had used them a few years ago. They seem to be good. Plus, they accept PayPal. These days, unless I already have an account with the company, as I do with Amazon, eBay and TigerDirect, I will NOT buy online unless they accept PayPal. Two reasons: it is easier and safer. So that is my story. If you need cables try cables.com or Tiger(direct).com. Yes, TigerDirect is the old CircuitCity! They are good.

%d bloggers like this: